Prices incl. German VAT plus shipping costs. Depending on the shipment address, VAT and therefore final price can vary at payment.
Ready to ship,
Delivery time Germany 2-3 days, other countries 6-10 days
BONDIC® CLASSIC Cartridge Refill with light-curing plastic for BONDIC® Repair-System
Cartridge contains 4 grams.
Please notice our BONDIC® Manual.
Hersteller (und verantwortliche Person) / Manufacturer (and responsible person) / Producteur (et personne responsable) / Produttore (e persona responsabile)
VIKO UG (haftungsbeschränkt)
Flurstr. 38
D-85402 Kranzberg
info@bondic.de
Warn- und Sicherheitshinweise / Warning and safety information / Avertissements and précautions / Avvertenze e istruzioni di sicurezza
AchtungH317 Kann allergische Hautreaktionen verursachen / H319 Verursacht schwere Augenreizung / H411 Giftig für Wasserorganismen mit langfristiger Wirkung P101 Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten / P102 Darf nicht in die Hände von Kindern gelangen / P261 Einatmen von Staub/Rauch/Gas/Nebel/Dampf/Aerosol vermeiden / P273 Freisetzung in die Umwelt vermeiden / P280 Schutzhandschuhe tragen / P333+313 Bei Hautreizung oder Ausschlag ärztlichen Rat/ärtzliche Hilfe einholen / P321 Besondere Behandlung (siehe das Kennzeichnungsetikett) / P501 Inhalt/Behälter der Entsorgung zuführenEUH204 Enthält Isocyanate. Kann allergische Reaktionen hervorrufen WarningH317 May cause an allergic skin reaction / H319 Causes serious eye irritation / H411 Toxic to aquatic life with long lasting effectsP101 If medical advice is needed, have product container or label at hand / P102 Keep out of reach of children / P261 Avoid breathing dust/fume/gas/mist/vapours/spray P273 Avoid release to the environment / P280 Wear protective gloves / P333+313 If skin irritation or rash occurs, get medical advice/attention / P321 Specific treatment (see the label) / P501 Dispose of contents/container in accordance with local regulationsEUH204 Contains isocyanates. May cause an allergic reaction AttentionH317 Peut provoquer une réaction allergique cutanée / H319 Provoque une sévère irritation des yeux / H411 Toxique pour les organismes aquatiques, entraîne des effets néfastes à long terme.
P101 En cas deconsultation d'un médecin, garder a disposition le récipient ou l'étiquette / P102 Tenir hors de portée des enfants / P261 Éviter de respirer les poussières/fumées/gas/brouillards/vapeurs/aérosols / P273 Éviter le rejet dans l'environnement / P280 Porter des gants de protection / P333+313 En cas d'irritation ou d'éruption cutanée, consulter un médecin / P321 Traitement spécifique (voir l'étiquette) / P501 Éliminer le contenu/récipient conformément à la réglementation locale
EUH204 Contient des isocyanates. Peut produire une réaction allergique Attenzione
H317 Può provocare una reazione allergica cutanea / H319 Provoca grave irritazione oculare / H411 Tossico per gli organismi acquatici con effetti di lunga durata
P101 In caso di consultazione medica, tenere a disposizione il contenitore o l'etichetta del prodotto / P102 Tenere fuori dalla portata dei bambini / P261 Evitare di respirare polvere/fumo/gas/nebbia/vapori/aerosol / P273 Evitare il rilascio nell'ambiente / P280 Indossare guanti protettivi / P333+313 In caso di irritazione o eruzione cutanea, consultare il medico / P321 Trattamento specifico (vedere l'etichetta) / P501 Smaltire il contenuto/il contenitore in conformità alla regolamentazione locale
EUH204 Contiene isocianati. Può provocare una reazione allergica
BONDIC Questions and Answers
What is the difference between BONDIC® and conventional adhesives?
Can BONDIC® harden in places with no light?
Can I replace instant adhesives with BONDIC®?
Can BONDIC® be handled by children?
Can I use BONDIC® for all temperatures?
Can I seal containers with BONDIC® (cracks, fissures)?
Can I modify BONDIC® constructions by adding more material (BONDIC®) to them later?
Can I process BONDIC® after it hardens (milling, polishing, varnishing)?
Can I connect parts with BONDIC® with a very small contact surfaces?
Can I sheath objects applied with BONDIC® to boost stability?
How can BONDIC® be removed from smooth surfaces?
Can I dye BONDIC® before curing?
Can I use BONDIC® as a insulating material?
Can I use BONDIC® on damp surfaces or under water?
Can I use BONDIC® to fix stone-chipping on my windshield?
What happens to BONDIC® left outdoor?
How long can BONDIC® be used in the closed cartridge?
How long is the shelf life of the LED?
For how many applications the 4 g cartridge lasts?
Is BONDIC® dishwasher safe?
Can I use BONDIC® for connecting objects which are relative to one another in motion after repair?
What is the difference between BONDIC® and conventional adhesives?
With adhesive in general you can glue two perfectly matching parts. However it is unable to replace broken parts or to perform 3D designs. Adhesive also cures quickly in air and requires pressure. BONDIC® also has an adhesive effect, but is also repairs, replaces, models and insulates and exactly at the time it has to!
Can BONDIC® harden in places with no light?
No, BONDIC® can only harden when exposed to light of a specific wavelenght. At least one of the two bonded parts has to be translucent.
Can I replace instant adhesives with BONDIC®?
No. BONDIC® has completely different properties than classic superglue. BONDIC® is more a modeling material with a controllable adhesive force.
Can BONDIC® be handled by children?
There is no risk of skin sticking uncontrollably and dangerously. Even so we recommend you only let children over 12-13 years handle this.
Can I use BONDIC® for all temperatures?
BONDIC® can be used in a temperature range from around -30 degrees Celsius to + 120 °C. Even when cured, BONDIC® is heat-resistant up to 120 °C, but at such high temperatures it should be noted that the strength is no longer as high as at room temperature.
Can I seal containers with BONDIC® (cracks, fissures)?
Yes, BONDIC® is suitable for sealing almost all kinds of materials. You have to work in layers and make sure that the first layer goes inside the crack or hole to get a perfect lining. More layers will secure the site and lead to a sustainable repair.
Can I modify BONDIC® constructions by adding more material (BONDIC®) to them later?
Yes, applying a fresh coat of BONDIC® on an already hardened coat does not pose a problem. Go ahead and use as much as you want whenever you want.
Can I process BONDIC® after it hardens (milling, polishing, varnishing)?
Yes, BONDIC® can be worked on subsequently using all conventional methods. Use the BONDIC® rasp for this (part of one of the sets). You can give the BONDIC® surface any desired structure and carry on with a priming coat followed by perfect varnishing or paint work.
Can I connect parts with BONDIC® with a very small contact surfaces?
Yes, BONDIC® is excellent for joints with extremely small contact surfaces in almost all materials. Even "point to point" fixing without applying the slightest pressure is possible.
By applying additional layers, the stability can be significantly and sustainably improved.
Can I sheath objects applied with BONDIC® to boost stability?
Yes, the option of layering material renders overlapping and sheathing. This radically enhances firmness and stability; in some cases it even enables it in the first place.
How can BONDIC® be removed from smooth surfaces?
We recommend the use of scrapers meant for ceramic hobs. Giving the BONDIC® a short, sharp shove from the side, dislodges it cleanly from the base. Any remnants left behind can be easily removed with conventional cleaners.
Can I dye BONDIC® before curing?
Yes, BONDIC liquid can be dyed by acrylic color micro particles (color powder). Use a toothpick and load just the tip with color powder and mix it with a drop of BONDIC®. Please note that this causes a longer curing time and it is recommended to reduce the thickness of each layer.
Can I use BONDIC® as a insulating material?
Yes, BONDIC® is a perfect insulating material on low voltage circuits only. BONDIC® must not be used in heavy current! Please note that BONDIC® is no replacement of any kind of solder!
Can I use BONDIC® on damp surfaces or under water?
Yes, as long as the surface is just wet and not greasy you can achieve a full setting and an adhesion depending on the surface structure. E.g. you can attach objects on the inner side of a water filled jar or even an aquarium etc.
Can I use BONDIC® to fix stone-chipping on my windshield?
Yes, clean the site and fill it up with BONDIC® in two to three layers. Please note that BONDIC® got a different optical refraction than glass. The repair of damages within your visibility filed is not recommended and generally this is just an emergency solution.
What happens to BONDIC® left outdoor?
BONDIC® is resistant against sunlight after hardening. Depending on the environmental conditions it could change the color to slight yellow.
How long can BONDIC® be used in the closed cartridge?
BONDIC® has a shelf life of one year at least at room temperature. However we assume a longer shelf life, as the liquid is completely protected in the black cartridge and the tin. After long periods (much more than one year), the liquid may take a slightly yellow color. But in any case BONDIC® does not become hard or dry like normal glue if it comes into contact with air. Requirement is a light-protected storage.
How long is the shelf life of the LED?
The shelf life of the LED is – similar to other battery-operated flashlights – six to eight hours. But you need the LED always for just a few seconds!
For how many applications the 4 g cartridge lasts?
Of course, this depends very much on the type of your application. You have about 70 drops at your disposal, so you can either repair a dozen charging cables, fix 70 glass stones for decoration or a complete cartridge is the last rescue for a pipe damage. Depending on!
Is BONDIC® dishwasher safe?
Once it is fully cured, BONDIC® is 100% waterproof. Just make sure, that the connection is strong enough to resist the pressure in the dishwasher.
Can I use BONDIC® for connecting objects which are relative to one another in motion after repair?
Yes, up to a certain limit of course. BONDIC® maintains a certain flexibility after getting cured. Depending on your construction a test is required and recommended firstly.
